Alcatel-Lucent 7210 SAS M Configuration Manual page 107

cd
Syntax
Context
Description
Parameters
7210 SAS M, T, X, R6 Basic System Configuration Guide
+r — Sets the read-only attribute on the specified file.
-r — Clears/resets the read-only attribute on the specified file.
cd [file-url]
file
This command displays or changes the current working directory in the local file system.
file-url — Syntax: [<local-url>|<remote-url> - [255 chars max]
remote-locn - [ <hostname> | <ipv4-address> | "["<ipv6-address>"]" ]
ipv4-address - a.b.c.d
ipv6-address - x:x:x:x:x:x:x:x[-interface]
cflash-id or usb-flash-id -
<none> — Displays the current working directory.
.. — Signifies the parent directory. This can be used in place of an actual directory name in a
directory-url.
directory-url — The destination directory.
cf1:|uf1: - 7210 SAS-X
local-url - [<cflash-id>/ |<usb-flash-id>/][<file-path>]
remote-url - [{ftp://|tftp://}<login>:<pswd>@
<remote-locn>/][<file-path>]
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
interface - 32 chars max, for link local addresses
cf1:|uf1: - 7210 SAS-M
cf1:|cf2:|uf1: - 7210 SAS-T
cf1:|cf1-A:|cf1-B:|cf2:|cf2-A:|cf2-B:|uf1:|uf1-A:| uf1-B: - 7210 SAS-R6
cf1:|uf1: - 7210 SAS-X
Configuration Commands
Page 107