Alcatel-Lucent 7210 SAS M Configuration Manual page 499

Sample Output for 7210 SAS-M
*A:7210>show>system# resource-profile
A:SAS-MX>show>system# resource-profile
===============================================================================
Active System Resource Profile Information
===============================================================================
-------------------------------------------------------------------------------
IPv6 FIB
-------------------------------------------------------------------------------
max-ipv6-routes
7210 SAS M, T, X, R6 Basic System Configuration Guide
Table 36: Show system resource-profile output fields.
Label
Mac and IPv4
Resource
Mac-only Resource
IPv6 128 bit
Resource
Mac and IPv6 64
bit Resource
system-max-ecmp
Sap Egress ACL
resource
Egress Internal
CAM
IPv6 FIB
G8032-fast-flood
Decommissioned
Ports
MBS pool
The total amount of egress internal CAM chunks configured for
use by MAC and IPv4 egress ACL match criteria policies.
The total amount of egress internal CAM chunks configured for
use only by MAC egress ACL match criteria policies.
The total amount of egress internal CAM chunks configured for
use only by IPv6 egress ACL match criteria policies (128-bit
IPv6 address can be specified in the match criteria).
The total amount of egress internal CAM chunks configured for
use by MAC and IPv6 egress ACL match criteria policies (only
64-bit higher order bits of the IPv6 address can be specified in
the match criteria).
Displays the maximum number of routes that will be allocated
per IP destination/prefix in hardware when the user enables
ECMP path sharing using multiple routes.
Displays the egress ACL resource allocation configured for vari-
ous match criteria.
Displays the resource allocation configured for the egress inter-
nal CAM.
Displays the amount of IPv6 FIB size configured for use by IPv6
routing.
Displays the resources configured for use by G8032 fast-flood
feature.
Disable – No resources are allocated for use by this feature.
The list of ports which have been decommissioned by the user.
Services cannot be configured on these ports.
Displays the value configured for mbs-pool. It is available only
on 7210 SAS-T.
: disable
System Management
Description
Page 499