Alcatel-Lucent 7210 SAS M Configuration Manual page 402

Date and Time Commands
Parameters start-week — Specifies the starting week of the month when the summer time will take effect.
start-day — Specifies the starting day of the week when the summer time will take effect.
start-month — The starting month of the year when the summer time will take effect.
hours — Specifies the hour at which the summer time will take effect.
minutes — Specifies the number of minutes, after the hours defined by the hours parameter, when the
zone
Syntax zone
no zone
Context config>system>time
Description This command sets the time zone and/or time zone offset for the device.
The OS supports system-defined and user-defined time zones. The system-defined time zones are
listed in
For user-defined time zones, the zone and the UTC offset must be specified.
The no form of the command reverts to the default of Coordinated Universal Time (UTC). If the time
zone in use was a user-defined time zone, the time zone will be deleted. If a dst-zone command has
been configured that references the zone, the summer commands must be deleted before the zone can
be reset to UTC.
Default zone utc - The time zone is set for Coordinated Universal Time (UTC).
Parameters
std-zone-name — The standard time zone name. The standard name must be a system-defined zone in
Page 402
Guide
Values
first, second, third, fourth, last
Default
first
Default sunday
Values
sunday, monday, tuesday, wednesday, thursday, friday, saturday
Values january, february, march, april, may, june, july, august, september, october, novem-
ber, december
Default january
Default
0
summer time will take effect.
Default
0
std-zone-name non-std-zone-name
[ |
Table 16, System-defined Time Zones, on page
Table 16. For zone names in the table that have an implicit summer time setting, for example
MDT for Mountain Daylight Saving Time, the remaining start-date, end-date and offset
parameters need to be provided unless it is necessary to override the system defaults for the time
zone.
For system-defined time zones, a different offset cannot be specified. If a new time zone is
needed with a different offset, the user must create a new time zone. Note that some system-
7210 SAS M, T, X, R6 Basic System Configuration
hh [:mm]
] [ ]
202.