Intel iAPX 86 User Manual page 266

iAPX 86,88 Family Utilities
Comments
If SEG1 is byte alignable, it will be located at 15FFH. If
SEG2 is byte or word alignable, it will be at 4F5AH.
Address assignment of groups, segments, and
classes can be in any order, unless they are
absolute.
A long jump to GO will be placed at location
OFFFFOH.
The initialization code is placed at address 32768
decimal (8000H).
Control
ADDRESSES
BOOTSTRAP
>
»
»
>
»
»
»
»
»
>
>
COMMENTS/NOCOMMENTS >
INITCODE/NOINITCODE
>
>
»
No initialization code 'Nil! be produced.
>
LINES/NOLINES >
Lines is the default, so it need not be specified.
>
This statement removes all debug records from the
object file, but keeps the information in the print file.
NOPUBLICS is implied by PURGE, but PUBLICS
overrides it.
SEG@A of CLASS1 will be the first relocatable seg-
ment located. SEG@B will be the next, followed
immediately by any other segments contained within
CLASS1. The extra segments in CLASS1 (and all of
the segments in CLASS2) are located in the order in
which they are encountered. Finally, the list in the
SEGMENTS subcontrol is handled.
MAP/NOMAP >
>
NAME >
OBJECTCONTROLS
ORDER
>
>
»
>
»
»
»
»
SERIES IV
LoeS6
EXAMPLES
Examples
LOC86 SOURCE.LNK NOCOMMENTS<cr>
LOC86 TEMP.LNK COMMENTS<cr>
LOC86 RUN.LNK NOLINES<cr>
LOC86 TEST.LNK<cr>
SYSTEM/LOC86 WORK/TESTER.LNK MAP<cr>
LOC86 GONE.LNK TO HERMAF.OVY NOMAP<cr>
K-27/K-28