Table of Contents
Advertisement
iAPX 86,88 Family Utilities
Comments
The print file is :F1 :TEMP.M P2.
The print file is :F5:INTERPL.MP2.
The print file is :F1 :MAP.
Information about line numbers is removed from the
print file.
All but the segment information is removed from the
print file.
No public information is included in the output files
(:F7:PRIVAT.MP2and :F7:PRIVAT).
All public symbol information will be included in both
the print file and output file.
The object file contains no public or debug informa-
tion, and the symbol table does not appear in the
print fiie.
The line and symbol information will be kept in the
print file and object file.
This control reserves the high order 64K of memory.
A 200H and a 100H section of memory at the top and
bottom of memory are reserved.
The size of segment MEMORY will be increased by
2000 bytes.
The size of segment FREUD will be decreased by
511 bytes.
The new segment size for XENDA is 7770 bytes.
:F9:AUTO will start at IGNITION.
:F7: HALTS will start at location 200H.
This statement will include the local symbol records
in the object file and the symbol information in the
print file.
PURGE
is
a
shorthand
for
NOSYMBOLS,
NOCOMMENTS, NOPUBLlCS, and NOLINES.
The symbol table will be printed on a line printer. A
line printer line can hold a four-column symbol table.
Control
PRINT INOPRINT
PRINTCONTROLS
PUBLICS/NOPUBLICS
PURGE/NOPURGE
RESERVE
SEGSIZE
START
SYMBOLS/NOSYMBOLS
SYMBOLCOLUMNS
>
>
>
>
>
>
>
>
>
>
>
SERIES III
LOC86
EXAMPLES
Examples
LOC86 : FS: INTERP. LNK<c r>
LOC86 :F4:PROG.LNK PRINT(:F1:MAP)<cr>
LOC86 :F1:LINEAR.LNK &<cr>
PRINTCONTROLS(NOLINES)<cr>
LOC86 :F7:PRIVAT.LNK NOPUBLICS<cr>
LOC86 :F3:PROJS.LNK PURGE<cr>
LOC86 :F9:AUTO.LNK START(IGNITION)<cr>
LOC86 :F7:HALTS.LNK START(OOH,200H)<cr>
LOC86 GESHTA.LNK SYMBOLS<cr>
LOC86 :F3:TEST.LNK PURGE<cr>
LOC86 :F1:TEST.LNK SYMBOLCOLUMNS(1)<cr>
1-29/1-30
Advertisement
Table of Contents
