Intel iAPX 86 User Manual page 123

LINK86 Controls and Error Messages
iAPX 86,88 Family Utilities
0-2
Table D-1. Summary of LINK86 Controls (Cont'd.)
Control Abbrev. Default
PUBLICS [EXCEPT(symbol [, ... ])]
I
PL [EC] PUBLICS
NOPUBLICS [EXCEPT(symbol [, ... ])]
I
NOPL [EC]
PUBLICSONLY(pafhname[, ... ]) PO Not applicable
PURGE PU NOPURGE
NOPURGE NOPU NOPURGE
RENAMEGROUPS({group TOgroup} [, ... ]) RG Not applicable
SEGSIZE( SS Not applicable
{segment[ \class[ \ overlay]]
(min-size [, [max- size]])}
[, ...
])
SYMBOLS SB SYMBOLS
NOSYMBOLS NOSB
SYMBOLCOLUMNS({1121314}) SC SYMBOLCOLUMNS(2)
TYPE TY TYPE
NOTYPE NOTY
The following are descriptions of all LINK86 error and warning messages. The
description of each message has up to four parts:
• Meaning-how to interpret the message
• Cause-the usual reason for the error or warning condition
• Effect-the state of LINK86 and the object file(s) after the message is issued
• User Action-what you can do to correct the condition
Not all these parts are given for each message. However, parts excluded are self-
explanatory.
Error messages are always fatal, but warning messages are not. In the event of a
warning, read the EFFECT of the warning carefully to determine whether the
resulting code is valid.
Error and warning messages are displayed at the console device, but printed only if a
listing would otherwise be printed.
ERROR 1: I/O ERROR
operating system error message
F I L E:
path name
ERROR 2:
I/O ERROR
operating system error message
F I L E:
pathname