Intel iAPX 86 User Manual page 141

LINK86 Controls and Error Messages
iAPX 86,88 Family Utilities
0-20
WARNING 49: MAXIMUM SIZE OF GROUP EXCEEDS 64K
G R 0
UP:
group name
Meaning
The maximum segment size for the segments contained in the specified group
exceeds 64K.
Cause
This error is usually caused by misuse of the SEGSIZE control.
Effect
LINK86 reduces the maximum size of the group and its constituent segments.
LINK86 continues processing the input module. The output module will be
executable.
User Action
No action is necessary. If you want to remove the error, examine the invocation line
and reinvoke LINK86 using the SEGSIZE comrol more carefully.
WARNING 50: MORE THAN ONE SEGMENT WITH THE MEMORY
ATTRIBUTE
S E G MEN T:
segment name
Meaning
After the first memory segment is found, LINK86 issues this warning each time it
finds a segment with the memory attribute.
Effect
LINK86 ignores the memory attribute on the segment specified in the message.
Processing continues with LINK86 treating the additional memory segment as just
another segment.
User Action
Depending on your intentions, this message may be ignored or you may wish to
change the segment definition and relink.
WARNING 51: SEGMENT WITH MEMORY ATTRIBUTE NOT PLACED
HIGHEST IN MEMORY
S E G MEN T:
segment name
Meaning
The specified memory segment was not located at the highest offset in its group.
Cause
This can only occur when you explicitly request this organization through the
ORDER control.
Effect
Since this can only occur by user request, LINK86 continues processing without side
effects.