Table of Contents
Advertisement
LOC86 Controls and Error Messages
iAPX 86,88 Family Utilities
G-14
WARNING 29:
OFFSET FIXUP OVERFLOW
MO DU
L E:
module name
REF ERE N C E D L
0
CAT ION:
20-bit address
F RAM E
0
F REF ERE N C E:
20-bit address
Meaning
While computing an offset from a base (FRAME OF REFERENCE), LOC86 found
that the REFERENCED LOCATION was more than 64K bytes away from the base.
Cause
This error usually occurs as a result of misuse of the ORDER or ADDRESSES
control. One of the segments of a group is outside the 64K byte physical segment
defined by its group basco
Effect
LOC86 continues processing. The print file will be valid, but the output file with
regard to the out-of-place segment will not be usable.
User Action
Find the symbol that corresponds to the referenced location, and change the
ORDER or ADDRESSES control.
WARNING 30:
UNRESOLVED EXTERNAL REFERENCE TO NAME
AT SPECIFIED ADDRESS
N
AM E:
symbol name
S E G MEN T:
segment name
ADD RES S:
20-bit address
Meaning
There is no public definition for the specified public symbol. There is an unresolved
external reference to that symbol in the specified segment.
Cause
You are locating a module that is not completely linked.
Effect
LOC86 continues processing with no side effects. The print file will be valid, and
except for the unresolved references the object file should be executable.
User Action
No action is necessary if the unresolved reference is known. Otherwise, you must
relink and resolve the external reference.
Advertisement
Table of Contents
