Table of Contents
Advertisement
iAPX 86,88 Family Utilities
Comments
If SEG1 is byte alignable, it will be located at 15FFH.
If SEG2 is byte or word alignable, it will be at 4F5AH.
Address assignment of groups, segments, and
classes can be in any order, as long as addresses do
not conflict with existing absolute addresses.
A long jump to GO will be placed at location
OFFFFOH.
The initialization code is placed at address
32768
decimal (8000H).
No initialization code will be produced.
LINES is the default, so it need not be specified.
This statement removes all debug records from the
object file, but keeps the information in the print file.
NOPUBLICS is implied by PURGE, but PUBLICS
overrides it.
SEG@A of CLASS1 will be the first relocatable
segment located. SEG@B will be next, .followed
immediately by any other segments contained within
CLASS1. The extra segments in CLASS1 (and all of
the segments in CLASS2) are located in the order in
which they are encountered. Finally, the list in the
SEGMENTS subcontrol is handled.
Control
ADDRESS
BOOTSTRAP
COMMENTS/NOCOMMENTS
INITCODE/NOINITCODE
LINES/NOLINES
MAP/NOMAP
NAME
OBJECTCONTROLS
ORDER
*
*
*
*
*
iRMX 86
LOe86
EXAMPLES
Examples
LOC86 : F1 :SOURCE. LNK NOCOMMENTS<cr>
LOC86 :F1 :TEMP.LNK COMMENTS<cr>
LOC86 : F1 :TEST. LNK NOINITCODE<cr>
LOC86 :F1:TEST.LNK<cr>
LOC86 :F1 :TESTER.LNK MAP<cr>
LOC86 :FO:SPCSEQ.LNK ORDER &<cr>
( C LAS S E S ( C LAS S 1 (S E
~@
A , S E G@ B),
&
< c r>
CLASS2),SEGMENTS{StG1\CLASS3 &<cr>
\OVERLAY1,SEG22,SEG10\CLASSS»<cr>
1-23/1-24
Advertisement
Table of Contents
