Intel iAPX 86 User Manual page 144

iAPX 86,88 Family Utilities LINK86 Controls and Error Messages
WARNING 58: NO START ADDRESS SPECIFIED IN INPUT MODULES
Meaning
The BIND control was specified, and none of the input modules has a start address.
Cause
The input list contains no main module.
Effect
The CS and IP registers remain uninitialized, and their values are dependent on your
system loader. The object module will be valid.
User Action
Reinvoke LINK86 with a main module or execute LOC86 with the START control.
ERROR 59: I/O ERROR WITH ROOT-FILE IN ASSUMEROOT CONTROL
F I L E: pathname
operating system message
Meaning
The ASSUMEROOT control was specified, but the root file identified by
pathname
in the invocation could not be accessed.
Effect
LINK86 immediately terminates processing.
User Action
Refer to your operating system documentation to correct the condition, then rein-
voke LINK86.
ERROR 60: OUTPUT FILE IS SAME AS INPUT FILE
F I L E:
pathname
Meaning
LINK86 detected an output path name identical to an input pathname.
Cause
The pathnames of the specified input file and the output file were identical.
Effect
LINK86 terminates processing immediately.
User Action
Reinvoke LINK86 after fixing the duplicate-name situation.
D-23