Intel iAPX 86 User Manual page 187

LOC86 Controls and Error Messages
iAPX 86,88 Family Utilities
G-18
WARNING 38: SEGMENT WITH MEMORY ATTRIBUTE NOT PLACED
HIGHEST IN MEMORY
S E G MEN T:
segment name
Meaning
The specified memory segment was not located at the highest address in memory.
Cause
This can only occur when you explicitly request this organization through the
ORDER or ADDRESSES control, or when you implicitly request it by assigning
another segment to the top of memory.
Effect
Since this can only occur by user request, LOC86 continues processing without side
effects.
ERROR 39: NO MEMORY BELOW SEGMENT FOR SPECIFIED SEGMENT
S E G MEN T:
segment name
S E G MEN T: segment name
Meaning
In the ORDER control you have requested that the first segment be located below
the second segment. LOC86 found that there is not enough memory to maintain this
order.
Cause
This error can only occur when one of the segments in an ORDER control is
absolute. The absolute segment is not necessarily either of the segments specified in
the command.
Effect
LOC86 immediately terminates processing; aU open files are closed. The contents of
the print and object files are undefined.
User Action
Modify the order control.