Intel iAPX 86 User Manual page 188

iAPX 86,88 Family Utilities
LOC86 Controls and Error Messages
WARNING 40: CANNOT MAINTAIN SPECIFIED ORDERING
S E G MEN T:
segment name
Meaning
LOC86 cannot locate all of the segments in the ORDER control consecutively.
Cause
This is usually caused by specifying absolute segments in the ORDER control or by
specifying the same segments in ORDER and ADDRESSES. The conflict might not
be immediately obvious. For example, the specified segment may be specified in the
ORDER control by its segment name and specified in the ADDRESSES control by
its class name.
Effect
LOC86 continues processing. The print and object files are valid. However, the
requested segment ordering is not maintained.
User Action
Carefully examine your invocation line to find the conflict and relocate the input
module.
ERROR
41:
SPECIFIED CLASS OUT OF ORDER
C
LA S S:
class name
Meaning
The ORDER control and ADDRESSES control for the specified class disagree.
Cause
Either you have assigned an address to the specified class or one of its constituent
segments, or the translator has made one of its constituent segments absolute. In
either case, the ORDER control cannot be realized.
Effect
LOC86 immediately terminates processing; all open files are closed. The contents of
the print and object files are undefined.
User Action
Modify the ADDRESSES control or modify the ORDER control.
G-19