LOC86 Controls and Error Messages
iAPX 86,88 Family Utilities
G-2
Table 0-1. Summary of LOC86 Controls (Cont'd.)
Control
Abbrev.
Default
RESERVE({addrTOaddr} [, ... ])
RS
Not applicable
SEGSIZE( {segment[ \class[ \ overlay
II
SS
Not applicable
(size)} [, ... ])
~
ST ART( {symbol
I
paragraph ,offset})
ST
Not applicable
SYMBOLS
SB
SYMBOLS
NOSYMBOLS
NOSB
SYMBOLCOLUMNS({112131 4})
SC
SYMBOLCOLUMNS (2)
The following are descriptions of all LOC86 error and warning messages. The
description of each message has up to four parts:
•
Meaning-how to interpret the message
•
Cause-the usual reason for the error or warning condition
•
Effect-the state of LOC86 and the object file(s) after the message is issued
•
User Action-what you can do to correct the condition
Not all these parts are given for each message. However, parts excluded are self-
explanatory.
Error messages are always fatal, but warning messages are not. In the event of a
warning, read the EFFECT of the warning carefully to determine whether the code
is valid.
Error and warning messages are displayed at the console device, but printed only if a
listing would otherwise be printed.
ERROR 1:
I/O ERROR:
operating system error message
Meaning
An 110 error was detected. Refer to the documentation for your operating system
for interpretation.
Effect
LOC86 immediately terminates processing; all open files are closed. The contents of
the print and object files are undefined.
User Action
Correct the error and restart LOC86.