Intel iAPX 86 User Manual page 189

LOC86·Controls and Error Messages
iAPX 86,88 Family Utilities
G-20
ERROR 42: SPECIFIED SEGMENT OUT OF ORDER
S E G MEN T:
segment name
Meaning
The ORDER control and ADDRESSES control for the specified segment disagree.
Cause
Either you have assigned an address to the specified segment or the translator has
made the segment absolute. In either case, the ORDER control cannot be realized.
Effect
LOC86 immediately terminates processing; all open files are closed. The contents of
the print and object files are undefined.
User Action
Modify the ADDRESSES control or modify the ORDER control.
ERROR 43: ADDRESS FOR CLASS SPECIFIED MORE THAN ONCE
C
LA S S:
class name
Cause
This is often caused by a typographical error or some other mechanical error while
entering the invocation line.
Effect
LOC86 immediately terminates processing; all open files are closed. The contents of
the print and object files are undefined.
User Action
Examine the invocation line and reinvoke LOC86 correctly.
ERROR 44: SEGMENT ADDRESS PREVIOUSLY SPECIFIED IN INPUT
MODULE OR COMMAND LINE
S E G MEN T:
segment name
C LA S S:
class name
Cause
Either the specified segment is absolute or it has been listed twice in the same
ADDRESSES control.
Effect
LOC86 immediately terminates processing; all open files are closed. The contents of
the print and object files are undefined.
User Action
Examine the invocation line. If the translator has made it an absolute segment,
either use the translator-assigned address or retranslate the segment.