Table of Contents
Advertisement
iAPX 86,88 Family Utilities
LOC86 Controls and Error Messages
ERROR 59:
GROUP ADDRESS PREVIOUSLY SPECIFIED IN INPUT
MODULE OR COMMAND LINE
G R 0
UP:
group name
Cause
Either you gave a single group an address twice in the same ADDRESSES control or
the group already had an address (due to a previous locate).
Effect
LOC86 immediately terminates processing; all open files are closed. The contents of
the print and object files are undefined.
User Action
Examine the invocation line and either use the previously assigned address or assign
the group one address per ADDRESSES control.
WARNING 60:
REFERENCED LOCATION IS NOT WITHIN 32K OF
SPECIFIED ADDRESS
MO D U L E:
module name
REF ERE NeE 0 L 0 CAT ION: 20-bit address
F RAM E 0 F REF ERE NeE: 20-bit address
Meaning
An 8089 self-relative reference is not within 32K bytes of its target address.
Cause
Either with the ORDER or ADDRESSES control you have separated the reference
from its target or the 8089 segment is too large.
Effect
LOC86 leaves th(! invalid reference and continues processing with no other side
effects. Both the print file and the object file
will be valid.
User Action
Examine the invocation line and reinvoke LOC86 correctly.
ERROR 61:
OVERLAY ERROR
Meaning
An internal LOC86 error has occurred.
User Action
Contact Intel immediately.
G-27
Advertisement
Table of Contents
