Intel iAPX 86 User Manual page 220

iAPX 86,88 Family Utilities
Comments
This example defines two public symbols, VARON E
and VARTWO, with absolute addresses 50H and
2000H, respectively.
In this example the root file is RTFILE and LlB1 and
LlB2 are library files.
This line creates an L TL module. The output object
file is TEST with no extension.
Control
ASSIGN
ASSUMEROOT
BIND/NOBIND >
This example specifies default to avoid ambiguity.
>
COMMENTS/NOCOMMENTS >
FASTLOAD/NOFASTLOAD
INITCODE
>
LINES/NOLINES >
LINES is the default, so it need not be specified.
>
This MEMPOOL example will increase the minimum
dynamic memory requirements by 20H bytes, and by
default the maximum size will increase, if necessary,
to equal the minimum.
The minimum dynamic memory requirement is 100H.
The maximum dynamic memory requirement is
300H.
MAP/NOMAP >
MEMPOOL
>
>
>
>
SERIES III
LI N K86
EXAMPLES
Examples
, LIB1, &<cr>
LINK86 TEST.OBJ,USER.LIB BIND PRINT<cr>
LINK86 :F1:S0URCE.OBJ NOCOMMENTS <cr>
. ; Ii iii
LINK86 :F1:MYPROG INITCODE<cr>
LINK86 : F1: RUN. OBJ NOLINES<c r>
LINK86 : F1 :TEST .OBJ LINES<cr>
LINK86 : F1 :TESTER.OBJ MAP<cr>
LINK86.86 :F3:MAIN.OBJ,USER.OBJ, &<cr>
PUBLICSONLY(:F2:8089.LOC) NOMAP<cr>
LINK86 :F1:TEST.OBJ,USER.LIB, &<cr>
PASCAL. LIB BIND MEMPOOL(+20H)<cr>
1-1711-18