Table of Contents
Advertisement
LOC86 Controls and Error Messages
iAPX 86,88 Family
Utilitie~
G-26
WARNING 56:
SEGMENT IN RESERVE SPACE
S E G MEN T:
segment name
Cause
Either an absolute segment uses the area reserved in the invocation line or you
assigned an address to a segment or class that forces the specified segment to be
located in the reserved area.
Effect
The specified segment is located in the reserved area, and LOC86 continues process-
ing with no other side effects. Both the print file and object file are usable.
User Action
If the assigned address is acceptable for the segment, no action is necessary.
ERROR 57:
INVALID GROUP NAME
ERROR IN COMMAND TAIL NEAR
#:
partial command tail.
Meaning
LOC86 was expecting a group name when it found a token that did not correspond
to a valid group name. LOC86 repeats the invocation line up to the point of the
error.
Cause
This is often caused by a typographical error in the invocation line.
Effect
LOC86 immediately terminates processing; all open files are closed. The contents of
the print and object files are undefined.
User Action
Examine the invocation line and reinvoke LOC86 correctly.
ERROR 58:
SPECIFIED GROUP NOT FOUND IN INPUT MODULE
G R 0
UP:
group name
Cause
This is often caused by a typographical error in the invocation line.
Effect
LOC86 immediately terminates processing; all open files are closed. The contents of
the print and object files are undefined.
User Action
Examine the invocation line to LOC86 and the link map for the input module.
Reinvoke LOC86 correctly.
Advertisement
Table of Contents
