Workpiece Coordinate System (Wcs) - Siemens SINUMERIK 828D Function Manual

Example
Actual-value display in relation to the WCS or SZS
Code (excerpt)
N10 X100
N20 X0
N30 $P_PFRAME = CTRANS(X,10)
N40 X100
10.4.7

Workpiece coordinate system (WCS)

Workpiece coordinate system (WCS)
The workpiece coordinate system (WCS) is the programming basis.
Figure 10-20 Programmable FRAME between SZS and WCS
Basic Functions
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
K2: Axis Types, Coordinate Systems, Frames
Actual value display: Actual value display:
Axis X (WCS) Axis X (SZS)
100 100
0 0
0 10
100 110
10.4 Coordinate systems
721