Siemens SINUMERIK 828D Function Manual page 814

Hide thumbs Also See for SINUMERIK 828D:
Table of Contents

Advertisement

K2: Axis Types, Coordinate Systems, Frames
10.9 Data lists
Identifier
$P_CYCFRAME
$P_EXTFR
$P_EXTFRAME
$P_IFRAME
$P_ISO1FR
$P_ISO2FR
$P_ISO3FR
$P_ISO4FR
$P_ISO1FRAME
$P_ISO2FRAME
$P_ISO3FRAME
$P_ISO4FRAME
$P_NCBFR[n]
$P_NCBFRAME[n]
$P_NCBFRMASK
$P_PARTFR
$P_PARTFRAME
$P_PFRAME
$P_SETFR
$P_SETFRAME
$P_TOOLFR
$P_TOOLFRAME
$P_TRAFRAME
$P_TRAFRAME
$P_UBFR
$P_UIFR[n]
$P_UIFRNUM
$P_WPFR
$P_WPFRAME
$AA_ETRANS[X]
$AA_ETRANS[X] is an axis­specific system variable of the DOUBLE type. The default setting in the system for
this variable is zero.
Values set by the user are activated through the NC/PLC interface signal:
DB31, ... DBX3.0 (external work offset)
814
Description
Active system frame for cycles
System frame for zero offset external in data management
Active system frame for external work offset
Active settable frame
Data management frame for ISO G51.1 Mirroring
Data management frame for ISO G68 2DROT
Data management frame for ISO G68 3DROT
System frame for ISO G51 Scale
Active system frame for ISO G51.1 Mirroring
Active system frame for ISO G68 2DROT
Active system frame for ISO G68 3DROT
Active system frame for ISO G51 Scale
Global basic frame of the data management, can be activated via G500,
G54...G599
Current NCU basic frame
0 to 15 NCU basic frames can be set through:
MD18602 MM_NUM_GLOBAL_BASE_FRAMES
Global basic frame mask
Data management frame for TCARR and PAROT
Active system frame for TCARR and PAROT with orientational toolholder
Programmable frame
Data management frame for actual value setting
Active system frame for actual value setting
Data management frame for TOROT and TOFRAME
Active system frame for TOROT and TOFRAME
Data management frame for transformations
Active system frame for transformations
1. Basic frame in the channel in the data management that is activated after
G500, G54...G599. Corresponds to $P_CHBFR[0].
Settable data management frames, can be activated via G500, G54...G599
Number of active settable frame $P_UIFR
Data management frame for the workpiece
Active system frame for the workpiece
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
Basic Functions

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 840d sl

Table of Contents