Siemens SINUMERIK 828D Function Manual page 1043

Source:
MCP - Switch
Feedrate override
Spindle override
Channel signals
Source:
MCP - Keys
NC start
NC stop
RESET
Single BLock
Feedrate, spindle signals
Source:
MCP - Keys
Feed stop
Feed enable
Spindle stop
Spindle enable
Checkback signals from user interface for controlling displays
Operating modes and machine functions
Destination:
MCP - LED
AUTOMATIC
MDA
JOG
REPOS
REF
TEACH IN
Aim:
MCP - LED
INC 1 ... 10 000, INC Var.
Basic Functions
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
P3: Basic PLC Program for SINUMERIK 840D sl
Destination:
Interface DB (all axis DBs)
DB31, ... .DBB0 (selected axis number) The feed
override of the 1st MCP is applied to all axes.
DB31, ... .DBB19 (parameter SpindleIFNo)
Destination:
Interface DB (parameter ChanNo)
DB21, ... .DBX7.1
DB21, ... .DBX7.3
DB21, ... .DBX7.7
DB21, ... .DBX0.4
Destination:
FC output parameters
Parameter: "FeedHold" linked with memory, LED
are controlled
Parameter: "SpindleHold" linked with memory,
LED are controlled
Source:
Interface DB (parameter BAGNo)
Display for BAG 1
DB11.DBX6.0
DB11.DBX6.1
DB11.DBX6.2
DB11.DBX7.1
DB11.DBX7.2
DB11.DBX7.0
Source:
Interface DB (parameter BAGNo)
Display for BAG 1
DB11.DBX2.0 - 8.5
13.13 Block descriptions
1043