Programming
For the purpose of setting the jerk for real-time events in accordance with the acceleration, the system variables
can be set as follows:
$AC_PATHJERK = $AC_PATHACC/smoothing time
•
$AC_PATHACC: Path acceleration [m/s
Smoothing time: freely selectable, e.g. 0.02 s
For information about programming system variables in the part program or synchronized actions, see Chapter
"Programming".
4.2.15.2
Programming
Syntax
path jerk
$AC_PATHJERK =
Functionality
The path jerk for real-time events is set via the channel-specific system variables.
Jerk value
:
•
Value range: Path jerk ≥ 0
3
•
Unit: m/s
Application:
•
Part program
•
Static synchronized action
Reset response
The function is deactivated on reset.
Supplementary conditions
Programming $AC_PATHJERK in the part program automatically triggers a preprocessing stop with REORG
(STOPRE).
Basic Functions
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
2
]
B2: Acceleration
4.2 Functions
239