User-Specific Asub For Ret And Repos; Function; Parameter Assignment - Siemens SINUMERIK 828D Function Manual

K1: Mode group, channel, program operation, reset response

9.11 User-specific ASUB for RET and REPOS

9.11 User-specific ASUB for RET and REPOS
9.11.1

Function

Function
The NCK software supplied contains preprogrammed processes (internal ASUBs) for implementation of the RET
and REPOS functions. They can be replaced by user-specific ASUBs written by the machine tool manufacturer.
The machine manufacturer is responsible for the contents of ASUB routines used to replace
ASUP.SYF supplied by Siemens.
Installation
In the manufacturer directory _N_CMA_DIR or in the user directory _N_CUS_DIR a routine with the name
"_N_ASUP_SPF" can be loaded. These must implement the actions desired by the user for the functions RET
and REPOS.
9.11.2

Parameter assignment

Activating
The parameters for the activation of the user-specific routine "_N_ASUP_SPF" are set with the machine data:
MD11610 $MN_ASUP_EDITABLE (activation of a user-specific ASUP program).
Bit 0 and bit 1 specify, which of the internal system routines are to be replaced by the user-specific ASUB:
Binary value Description
0 Neither in case RET nor in case of REPOS the user-specific routine _N_ASUP_SPF is
activated.
1 The user-defined routine is activated for RET, the routine provided in the system is
activated for REPOS.
2 The user-defined routine is activated for REPOS, the routine provided in the system is
activated for RET.
3 As in case RET and also in case of REPOS the user-specific routine is activated.
Bit 2 defines in which directory the user-specific routine is to be searched first in case of activation.
Bit Value Description
2 0 The user-specific routine is searched first in the user directory _N_CUS_DIR.
1 The user-specific routine is searched first in the manufacturer directory _N_CMA_DIR.
604
DANGER
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
Basic Functions