Identification; Fig. 8-1: Nameplate (Example) - Bosch Rexroth IndraControl VCP 20 Project Planning Manual

8-2 Bosch Rexroth AG | Electric Drives and Controls
Maintenance and Installation
8.5

Identification

You can identify the small operator terminal by the nameplate on the
rear.

Fig. 8-1: Nameplate (example)

1 Ordering name / Short type designation
2 Part number
3 Voltage and power specification
4 Serial number
Depending on the size of the display, you will be able to read various
types of information as the operating device is initialized: clock fre-
quency, application memory size, current firmware version, program-
ming software version, project name, time, date, number of compilation
runs and a random number.
Because the initialization mask is visible only for a few seconds there is
a possibility to represent this mask for a longer time period.
1. Hold down an arbitrary key at the operator terminal to generate an
error message.
2. Read the firmware version now.
3. Release the key to complete the initialization procedure of the oper-
ator terminal.
Rexroth IndraControl VCP 20 | R911299722 / 02