Working basis
Closing the hook covers
To close the hook covers:
1. Insert the left hook cover (1) into the cutout on the left next to the throat
2. Push the left hook cover (1) against the cutout and downward at the
The left hook cover (1) audibly clicks into place.
3. Insert the right hook cover (2) into the cutout on the right next to the
4. Push the right hook cover (2) against the cutout and downward at the
The right hook cover (2) audibly clicks into place.
3.11 Disassembling and assembling the throat plate
Fig. 22: Disassembling and assembling the throat plate (1)
(1) - Throat plate
Disassembling the throat plate
To disassemble the throat plate:
1. Lock the sewing feet in place at the top ( Operating Instructions).
2. Open the hook covers ( p. 30).
3. Loosen the 2 screws (2).
4. Remove the throat plate (1).
Service Instructions 195 - 00.0 - 12/2017
plate.
rear and the front, respectively.
throat plate.
rear and the front, respectively.
①
②
(2) - Screw
31