Establishing A Peer-To-Peer Ethernet Connection To The Control - Siemens SINUMERIK 802D sl Programming And Operating Manual

Network operation

11.7 Establishing a peer-to-peer Ethernet connection to the control

No modifications to the settings are possible in this state.
The softkey label changes to "Connect. OFF".
In the lower right corner of the screen, the icon shows that the connection to PC via the
RS232 interface is active.
11.7 Establishing a peer-to-peer Ethernet connection to the control
You are now in the <SYSTEM> operating area.
Press the softkeys "Service display" >"Service control".
Figure 11-7
Press "Service network".
308
"Service control"
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
Surface grinding