Siemens SINUMERIK 802D sl Programming And Operating Manual page 76

Automatic mode
6.4 Block search
The search term can be entered with the following functions:
● "Text"
● "Block no."
Search result
The required part program block is displayed in the "Block display" window.
Note
For "Execute externally", no block search is possible.
Regrinding
"Regrinding" enables you to remachine the "seat" of a workpiece that has already been
machined, either with or without an offset, but always with the same technological values.
Use this softkey to display the "Regrinding" window.
Figure 6-9
Enter the offset values for regrinding.
76
The systems jumps to the line with the corresponding text.
A toggle field is provided to define from which position you will search for the term.
The cursor is positioned at the line with the "Line number".
Regrinding
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
Surface grinding