Siemens SINUMERIK 802D sl Programming And Operating Manual page 148

System
8.6 SYSTEM - "Start-up files" softkeys
● Data (in text format)
● Commissioning archive (drive/NC/PLC/HMI)
● PLC project (*.PTE)
● File for license key
Reading-in and reading-out data on a CompactFlash Card (CF card).
Reading-in and reading-out data to a PC via a network. The RCS tool must be installed on
the PC (only for SINUMERIK 802D sl pro).
Note
The RCS tool provides a detailed online help function. Refer to this help menu for further
details e.g. establishing a connection, project management etc.
Reading-in and reading-out data via the RS232 interface.
148
These data are special initialization data and are transferred in an ASCII file.
– Machine data
– Setting data
– Tool data
– R parameters
– Work offset
– Leadscrew error compensation
– Sag compensation
– Global user data
These data constitute a commissioning file for HMI data and are transferred in the binary
format using the HMI archive format.
– Drive machine data
– NC data
– NC directories
– Display machine data
– Leadscrew error compensation
– Sag compensation
– PLC project
– HMI data and applications
A direct exchange between the control system and programming tool is possible without
conversion with the support of PLC project handling in the programming tool export
format.
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
Surface grinding