Siemens SINUMERIK 802D sl Programming And Operating Manual page 79

Figure 6-12
Operating sequence to set and save the display area
1. You have selected an area in the simulation view.
2. Press the "Display areas" function.
3. Press the "Window min/max" so that a maximum display can be see according to the
4. In the "Comment field", you can assign a name to the area.
5. Complete the entry with <Input>.
6. Press "Save area".
Activating or deleting an area
You have selected a display area.
Using the cursor keys, select the area that you wish to either activate or delete.
Press "Activate area" or "Delete area".
Surface grinding
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
Display area "Window max"
screen "Display areas "Window max".
Automatic mode
6.5 Simultaneous recording
79