Siemens SINUMERIK 802D sl Programming And Operating Manual page 143

Format
Figure 8-38
The operand address displays the value incremented by 1.
The operand address displays the value respectively decremented by 1.
Use this softkey to delete all operands.
Cyclic updating of the values is interrupted. Then you can change the values of the
operands.
Use the "Status list" function to display and modify PLC signals.
There are 3 lists to choose from:
● Inputs (default setting) left-hand list
● Flags (default setting) center list
● Outputs (default setting) right-hand list
● Variable
Surface grinding
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
B Binary
H Hexadecimal
D Decimal
The binary representation is not possible with double words. Counters and timers
are represented decimally.
PLC status display
8.5 SYSTEM - "PLC" softkeys
System
143