Siemens SINUMERIK 802D sl Programming And Operating Manual page 304

Network operation
11.3 User management
Figure 11-1
The user accounts serve for saving personal settings of the users.
A user account is required for communication between the control with the RCS802 tool on
the PC.
For this purpose, the user has to enter this password on the HMI during RCS log-in (seeUser
log in - RCS log in (Page 305)) via the network.
This password is required also, if the user want to communicate with the control system from
the RCS tool.
Use the "Create" softkey to insert a new user into the user management.
When "Creating" a new account, enter the user name and the log-in password in the input
fields.
Use the "Delete" softkey to delete the selected user from the user management.
304
User accounts
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
Surface grinding