Siemens SINUMERIK 802D sl Programming And Operating Manual page 146

System
8.5 SYSTEM - "PLC" softkeys
Structure of the reference list (file PLCPROG.LST)
It is divided into 3 areas:
Number
1 to 100
101 to 200
201 to 255
The notation is carried out for each program by lines. Two columns are intended per line,
which must be separated from each other by TAB, space or the "|" character. In the first
column, the PLC reference number must be specified, and in the second column, the file
name.
Example:
1 | shaft.mpf
2 | taper.mpf
This function can be used to insert or modify PLC user alarm texts. Select the desired alarm
number using the cursor. At the same time, the text currently valid is displayed in the input
line.
Figure 8-42
Enter the new text in the input line. Press the "Input" key to complete your input and select
"Save" to save it.
For the notation of the texts, please refer to the operating instructions.
146
range
User area
Machine manufacturer
Siemens
Editing the PLC alarm text
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
Protection level
User
Machine manufacturer
Siemens
Surface grinding