Siemens SINUMERIK 802D sl Programming And Operating Manual page 113

Figure 8-3
After selecting the "Accept" softkey, the password is set.
Use "Cancel" to return without any action to the " SYSTEM" main screen.
"Change Password"
Figure 8-4
Depending on the access right, various possibilities are offered in the softkey bar to change
the password.
Select the password level using the appropriate softkeys. Enter the new password and press
"Accept" to complete your input. You will be prompted to enter the new password once more
for confirmation.
Press "Accept" to complete the password change.
Use "Abort" to return without any action to the start screen.
Surface grinding
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
Entering the password
Change password
System
8.1 "System" operating area
113