Siemens SINUMERIK 802D sl Programming And Operating Manual page 117

Incorrect parameterization may result in destruction of the machine!
The machine data are divided into the groups described in the following.
General machine data
Open the "General machine data" window. Use the Page Up / Page Down keys to browse
forward / backward.
Figure 8-7
Executes a warm restart at the control.
"Find"
Type the number or the name (or a part of the name) of the machine data you are looking for
and press "OK".
The cursor will jump to the data searched.
Use this softkey to continue searching for the next match.
Surface grinding
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
CAUTION
General machine data
8.3 SYSTEM - "Machine data" softkeys
System
117