Siemens SINUMERIK 802D sl Programming And Operating Manual page 150

System
8.6 SYSTEM - "Start-up files" softkeys
Baud rate
Stop bits
Parity
Data bits
Overwriting
with
confirmation
Reading-in and reading-out data of the manufacturer's directory "F".
Reading-in and reading-out data of a USB FlashDrive.
Use this function to create/restore a commissioning archive on/from the system
CompactFlash Card.
No archive file has been created in the following display. The symbol for the zip archive
sends a signal with an exclamation mark.
150
... used to set the interface transmission rate.
300 baud
600 baud
1200 baud
2400 baud
4800 baud
9600 baud
19200 baud
38400 baud
57600 baud
115200 baud
Number of stop bits with asynchronous transmission
Input:
1 stop bit (default setting)
2 stop bits
Parity bits are used for error detection. These are added to the coded character to
convert the number of digits set to "1" into an odd or even number.
Input:
No parity (default setting)
Even parity
Odd parity
Number of data bits with asynchronous transmission
Input:
7 data bits
8 data bits (default)
Y: When reading in, it is checked whether the file already exists in the NC.
N: The files are overwritten without confirmation warning.
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
Surface grinding