Siemens SINUMERIK 802D sl Programming And Operating Manual page 68

Automatic mode
6.1 Automatic mode
Figure 6-2
Parameter
Table 6- 1
Parameter
MCS
X
Z
+ X
- Z
Position
mm
Distance-to-
go
G function
Spindle S
r.p.m.
Feed F
mm/min or
mm/rev
Tool
Current
block
68
Automatic start screen
Description of the parameters in the working window
Explanation
Displays the existing axes in the MCS or WCS
If you traverse an axis in the positive (+) or negative () direction, a plus or minus sign
will appear in the relevant field.
If the axis is already in the required position, no sign is displayed.
These fields display the current position of the axes in the MCS or WCS.
These fields display the current position of the axes in the MCS or WCS.
Displays important G functions
Displays the actual value and the setpoint of the spindle speed.
Displays the path feedrate actual value and setpoint.
Displays the currently active tool with the current edge number (T..., D...).
The block display displays seven subsequent blocks of the currently active part
program. The display of one block is limited to the width of the window. If several
blocks are to be executed in quick succession, you are recommended to switch to the
"Program progress" window. To switch back to the seven-block display, use the
<Program sequence> softkey.
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
Surface grinding