Siemens SINUMERIK 802D sl Programming And Operating Manual page 176

Cycles
9.9 Dressing and profiling - CYCLE416
Sketch of the geometry parameters
Figure 9-8
Programming example
Machining sequence:
● Single-stroke dressing with dressing amounts of 0.02 mm (left) and 0.01 mm (right) after
● The number of idle strokes is stored in the tool data, along with the peripheral speed
N10 T1D1
N20 CYCLE416(0.02,0.01,0.01,0.2,0.2,0.2,0.2,0.2,1,35,5)
N30 M30
176
Dressing and profiling - CYCLE416
every 5 workpieces.
ratios of the spindles in the case of a rotating dresser.
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
Surface grinding