Siemens SINUMERIK 802D sl Programming And Operating Manual page 114

System
8.1 "System" operating area
Resetting the credential
User network log-in
Use "Change language" to select the user interface language.
Figure 8-5
Use the cursor keys to select the language and confirm it by pressing "OK".
Note
The HMI is automatically restarted when a new language is selected.
Use "Service language" to always select "English" as the user interface language.
Press the "Service language" softkey again to restore the previously active language (e. g.
"Simpl. Chinese").
Note
An asterisk "*" marks the languages you have used.
"Save data"
This function will save the contents of the volatile memory into a nonvolatile memory area.
Requirement:
Do not carry out any operator actions while the data backup is running!
114
User interface language
There is no program currently executed.
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
Surface grinding