Siemens SINUMERIK 802D sl Programming And Operating Manual page 190

Cycles
9.14 Dressing with profile roller - CYCLE430
Sketch of the geometry parameters
Figure 9-13
Programming example
Machining sequence:
● 2-stroke dressing with a dressing amount of 0.02 mm and 2 sparking-out revolutions
● The number of idle strokes is stored in the tool data, along with the peripheral speed
N10 T1D1
N20 CYCLE430(0.02,20,0.2,2,2,35,5)
N30 M30
190
Dressing with profile roller - CYCLE430
every 5 workpieces.
ratios of the spindles.
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
Surface grinding