Siemens SINUMERIK 802D sl Programming And Operating Manual page 78

Automatic mode
6.5 Simultaneous recording
● "Show ..."
● "Display areas"
● "Delete window"
● "Cursor"
Exit the "Simultaneous recording" function.
"Display areas"
Using the "Display areas" function, you have the possibility of saving a previously selected
area from the simulation display.
The menu for the display area can be selected using the "Window min/max" function.
Figure 6-11
78
– "All G17 blocks"
– "All G18 blocks"
– "All G19 blocks"
See the following page for a description.
– "Set cursor"
– "Cursor fine", "Cursor coarse", "Cursor very coarse"
When the cursor keys are pressed, the cross hair moves in small, average or large
steps.
Display area "Window min"
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
Surface grinding