Lens Removal - Barco DP K-19B Series User And Installation Manual

Lenses & lens holder
Image 5–6
9. Perform a lens HOME & RETURN operation. (See user guide of the "Communicator" chapter Installation >
Advanced > Lens parameters)
Note: The HOME & RETURN operation enables the projector to determine the reference
positions of the motorized ZOOM and FOCUS of the installed lens.
For the lenses with a focus adjustment mounted on the lens (4K lenses) , the lens holder goes
to a normal (fixed) focus position. For these lenses, do not mechanically adjust the focus
position of the lens holder, otherwise the normal position will be lost.
A Spatial Color Calibration (SCC) has to be execute in case of a first install or in case a High
Brightness lens is swapped with a High Contrast lens or vice versa. See user guide of the
Communicator for detail SCC calibration instructions.
CAUTION: Never transport the projector with a lens mounted in the lens holder. Always remove the
lens before transporting the projector. Neglecting this can damage the lens holder and prism.

5.4 Lens removal

How to remove a lens?
1. Support the lens with one hand while you unlock the lens holder by sliding the lock handle towards the
"unlocked" position as illustrated.
Image 5–7 Unlock lens
2. Gently pull the lens out of the lens holder.
64 R5905753 /17 DPxK-19B/23B/P