Adding A User Account; Changing User Account Information; Deleting A User Account - D-Link DWL-8600AP User Manual

D-Link UWS User Manual
Field
Encryption Key

Adding a User Account

Use the following procedures to add a user account. The system supports one Read/Write user and five Read
Only users.
1. From the User menu, select Create.
The screen refreshes.
2. Enter a username and password for the new user, then re-enter the password in the Confirm Password
field.
3. Click Submit to update the switch with the values on this screen.
If you want the switch to retain the new values across a power cycle, you must perform a save.

Changing User Account Information

You cannot add or delete the Read/Write user, but you can change the username and password. To change
the password for an existing account or to overwrite the username on an existing account, use the following
procedures.
1. From the User menu, select the user to change.
The screen refreshes.
2. To alter the username or, delete the existing name in the Username field and enter the new username.
To change the password, delete any asterisks (*) in the Password and Confirm Password fields, and then
enter and confirm the new password.
3. Click Submit to update the switch with the values on this screen.
If you want the switch to retain the new values across a power cycle, you must perform a save.

Deleting a User Account

Use the following procedures to delete any of the Read Only user accounts.
1. From the User menu, select the user to delete.
The screen refreshes.
2. Click Delete to delete the user.
This button is only visible when you have selected a user account with 'Read Only' access. You cannot
delete the 'Read/Write' user.
If you want the switch to retain the new values across a power cycle, you must perform a save.
D-Link
Oct. 2015
Table 13: User Accounts Fields (Cont.)
Description
If you selected DES in the Encryption Protocol field enter the SNMPv3
Encryption Key here. Otherwise this field is ignored. Valid keys are 0 to 15
characters long. The Apply check box must be selected in order to change the
Encryption Protocol and Encryption Key.
Unified Wired and Wireless Access System
User Accounts
Page 80