Poe Configuration; Figure 12: Poe Configuration; Table 7: Poe Configuration Fields - D-Link DWL-8600AP User Manual

Dws-4000 series access points

Hide thumbs Also See for DWL-8600AP:

Table of Contents

D-Link UWS User Manual

PoE Configuration

Use the PoE Configuration page to configure the Power over Ethernet (PoE) features.

To access the PoE Configuration page, click LAN > Administration > PoE Configuration in the navigation menu.

The following figure shows the fields that display.

System Usage Threshold

Power Management Mode

Sets threshold level at which a trap is sent if the total power consumed is

greater than or equal to the specified percentage of total power available.

Sets the PoE switch in the following power management modes. The options

are as follows:

• Static: In this mode the power initially requested by the powered device is

reserved for the port alone. The reserved power is also equal to the power

limit of the port. Thus the total power available for the prospective

powered devices is less than the actual available power. This configuration

is useful in cases when the powered devices can draw variable power and

also be assured that power is always available for this purpose.

• Dynamic: In this mode there is no power reservation for a port. Thus the

total power available for the prospective powered devices is more in this

configuration. This configuration is useful when there are many powered

devices and less power available with the PoE switch.

Select the slot and port with the information to configure.

Enables or disables the ability of the port to deliver power.

Card Configuration

Unified Wired and Wireless Access System

Show Quick Links

Table of Contents