D-Link DWL-8600AP User Manual page 724

D-Link UWS User Manual
5. If the APs are already managed, use the following steps to reapply the profile so the new settings take
effect:
a. Go to the WLAN > Administration > Advanced Configuration > AP Profiles page.
b. Select the check box next to the profile you modified.
c. Click Apply.
A message appears and indicates that the AP radios will be reset, which will disassociate any associated
wireless clients. Click OK to continue.
6. To monitor the current WLAN utilization rate for a radio, go to the WLAN > Monitoring > Access Point >
Managed AP Status > Radio Detail page and select the AP (listed by MAC address) and its radio.
The WLAN Utilization field displays the current traffic load that the radio is bearing based on the total
possible percentage of traffic that the radio can handle.
D-Link
Oct. 2015
Optimizing WLAN Traffic
Unified Wired and Wireless Access System
Page 724