D-Link UWS User Manual
Field
Auto Summary Mode
Host Routes Accept Mode
Global Route Changes
Global Queries
Default Information Originate When enabled, RIP originates a default route (0.0.0.0/0.0.0.0)
Default Metric
• If you make changes to the page, click Submit to apply the changes to the system.
RIP Interface Configuration
Use the RIP Interface Configuration page to enable and configure or to disable RIP on a specific interface.
To display the page, click LAN > L3 Features > RIP > Interface Configuration in the navigation tree.
D-Link
Oct. 2015
Table 177: RIP Configuration Fields (Cont.)
Description
Select Enable or Disable from the dropdown menu. If you select Enable,
groups of adjacent routes are summarized into single entries, in order to
reduce the total number of entries. The default is Disable.
Select Enable or Disable from the dropdown menu. If you select Enable, the
router accepts host routes. The default is Enable.
Displays the number of route changes made to the IP Route Database by RIP.
This does not include the refresh of a route's age.
Displays the number of responses sent to RIP queries from other systems.
Sets a default for the metric of redistributed routes.This field displays the
default metric if one has already been set, or blank if not configured earlier.
Valid values are 1 to 15.
Figure 195: RIP Interface Configuration
Unified Wired and Wireless Access System
Configuring RIP
Page 305