Serial Port; Figure 14: Serial Port; Table 9: Serial Port Fields - D-Link DWL-8600AP User Manual

Dws-4000 series access points

Hide thumbs Also See for DWL-8600AP:

Table of Contents

D-Link UWS User Manual

Serial Port

The Serial Port Configuration page allows you to change the switch's serial port settings. In order for a terminal

or terminal emulator to communicate with the switch, the serial port settings on both devices must be the

same. Some settings on the switch cannot be changed.

To view or configure the serial port settings on the switch, click LAN > Administration > Serial Port in the

navigation tree.

Serial Port Login Timeout

Baud Rate (bps)

Character Size (bits)

Flow Control

• If you change any data, click Submit to apply the changes to the system. If you want the switch to retain

the new values across a power cycle, you must perform a save.

Indicates how many minutes of inactivity should occur on a serial port

connection before the switch closes the connection. Enter a number between

0 and 160. The factory default is 5. Entering 0 disables the timeout.

Select the default baud rate for the serial port connection from the menu. The

factory default is 115200.

The number of bits in a character. This is always 8.

Whether hardware flow control is enabled or disabled. It is always disabled.

The number of stop bits per character. Its is always 1.

The parity method used on the serial port. It is always None.

Unified Wired and Wireless Access System

Show Quick Links

Table of Contents