Reset Vlan Configuration; Figure 109: Reset Vlan Configuration - D-Link DWL-8600AP User Manual

D-Link UWS User Manual
Field
Voice VLAN Interface Mode
Operational State
• If you make any changes, click Submit to apply the change to the system.
• Click Refresh to display the latest information from the router.

Reset VLAN Configuration

Use the Reset Configuration page to return all VLAN parameters for all interfaces to the factory default values.
To access the Reset Configuration page, click LAN > L2 Features> VLAN > Reset Configuration in the navigation
tree.
When you click Reset, the screen refreshes, and you are asked to confirm the reset. Click Reset again to restore
all default VLAN settings for the ports on the system.
D-Link
Oct. 2015
Table 94: Voice VLAN Configuration Fields (Cont.)
Description
Select one of the following interface modes:
• Disable: The voice VLAN service is disabled on this interface. Note that the
Admin mode field takes precedence; i.e., if a particular interface is
enabled, but the Admin Mode field is set to Disabled, then the service will
not be operational.
• VLAN ID: The voice VLAN packets are uniquely identified by a number you
assign. All voice traffic carries this VLAN ID to distinguish it from other data
traffic which is assigned the port's default VLAN ID. However, voice traffic
is not prioritized differently than other traffic.
• Dot1p: This parameter is set by the VoIP device for all voice traffic to
distinguish voice data from other traffic. All other traffic is assigned the
port's default priority.
• None: The voice VLAN service is disabled on this interface; however, unlike
Disable mode, the CoS override feature is still operational on the port.
• Untagged: The VoIP device sends untagged voice traffic.
Indicates whether the voice VLAN is operational.

Figure 109: Reset VLAN Configuration

Voice VLAN Configuration
Unified Wired and Wireless Access System
Page 199