Deleting A Remote Logging Host; Persistent Log Configuration; Figure 48: Persistent Log Configuration - D-Link DWL-8600AP User Manual

Dws-4000 series access points
Hide thumbs Also See for DWL-8600AP:
Table of Contents

Advertisement

D-Link UWS User Manual

Deleting a Remote Logging Host

To delete a remote logging host from the configured list, select the IP address of the host from the Host field,
and then click Delete.

Persistent Log Configuration

The persistent log is stored in persistent storage, which means that the log messages are retained across a
switch reboot.
• The first log type is the system startup log. The system startup log stores the first N messages received
after system reboot. This log always has the log full operation attribute set to stop on full and can store up
to 32 messages.
• The second log type is the system operation log. The system operation log stores the last N messages
received during system operation. This log always has the log full operation attribute set to overwrite.
This log can store up to 1000 messages.
Either the system startup log or the system operation log stores a message received by the log subsystem that
meets the storage criteria, but not both. In other words, on system startup, if the startup log is configured, it
stores messages up to its limit. The operation log, if configured, then begins to store the messages.
The system keeps up to three versions of the persistent logs, named <FILE>1.txt, <FILE>2.txt, and <FILE>3.txt.
Upon system startup, <FILE>3.txt is removed, <FILE>2.txt is renamed <FILE>3.txt, <FILE>1.txt is renamed
<FILE>2.txt, <FILE>1.txt is created and logging begins into <FILE>1.txt. (Replace <FILE> in the above example
to specify
for the operation log and
olog
The local persistent logs can be retrieved via the Web or CLI, or via xmodem over the local serial cable.
Use the Persistent Log Configuration page to enable or disable persistent logging and to set the severity filter.
To access the Persistent Log Configuration page, click LAN > Administration > Log > Persistent Logger
Configuration in the navigation menu.
D-Link
Oct. 2015
for the startup log.)
slog

Figure 48: Persistent Log Configuration

Managing and Viewing Logs
Unified Wired and Wireless Access System
Page 120

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents