D-Link UWS User Manual
Field
Probe Requests Threshold
Interval
Probe Requests Threshold
Value
Authentication Failure
Threshold Value
Command Buttons
The page includes the following buttons:
• Submit—Updates the switch with the values you enter. To retain the new values across a power cycle,
you must perform a save (Tool > Save Changes).
• Refresh—Updates the page with the latest information.
Known Client
The Known Client Summary shows the wireless clients currently in the Known Client Database and allows you
to add new clients to the database. The database contains wireless client MAC addresses and names. The
database is used to retrieve client descriptive names from the RADIUS server as well as implement MAC
Authentication.
D-Link
Oct. 2015
Table 363: WIDS Client Configuration (Cont.)
Description
Specify the number of seconds an AP should spend counting the probe
messages sent by wireless clients.
Specify the number of probe requests a wireless client is allowed to send
during the threshold interval before the event is reported as a threat.
Specify the number of 802.1X authentication failures a client is allowed to
have before the event is reported as a threat.
Figure 397: Known Client Summary
Configuring Advanced Settings
Unified Wired and Wireless Access System
Page 636