Figure 95: Vlan Configuration; Table 81: Vlan Configuration Fields - D-Link DWL-8600AP User Manual

Dws-4000 series access points

Hide thumbs Also See for DWL-8600AP:

Table of Contents

D-Link UWS User Manual

VLAN ID List

Participation All

Figure 95: VLAN Configuration

You can use this screen view/modify/delete an existing VLAN configuration or

to create new single/multiple VLAN IDs specified in VLAN ID field. Use this pull

down menu to select one of the existing VLANs to view/modify the

configuration. You can select Create to add new VLANs or select Delete from

the pull down to delete the existing VLANs

Use this field to specify whether all the ports will participate in this VLAN. The

factory default is 'Autodetect'. The possible values are:

• Include: All the ports are always a member of this VLAN. This is equivalent

to registration fixed in the IEEE 802.1Q standard.

• Exclude: All the ports are never a member of this VLAN. This is equivalent

to registration forbidden in the IEEE 802.1Q standard.

• Auto detect: Specifies that all ports may be dynamically registered in this

VLAN via GVRP. All ports will not participate in this VLAN unless it receives

a GVRP request. This is equivalent to registration normal in the IEEE

802.1Q standard.

Select the tagging behavior for all the ports in this VLAN. The factory default

is 'Untagged'. The possible values are:

• Tagged: All frames transmitted for this VLAN will be tagged.

• Untagged: All frames transmitted for this VLAN will be untagged.

Managing VLANs

Unified Wired and Wireless Access System

Show Quick Links

Table of Contents