Peer Switch; Figure 392: Peer Switch Configuration Request Status; Table 359: Peer Switch Configuration Request Status - D-Link DWL-8600AP User Manual

D-Link UWS User Manual

Peer Switch

The Peer Switch Configuration feature allows you to send a variety of configuration information from one
switch to all other switches. In addition to keeping the switches synchronized, this function allows you to
manage all wireless switches in the cluster from one switch. The Peer Switch Configuration Request Status
page provides information about the status of the configuration upgrade on the switches in the cluster.
To initiate a configuration update on a specific peer switch, select the box next to the IP address of the peer
switch to update, and then click Start. To update all peer switches, click Start All.
The following table describes the fields on the Peer Switch Configuration Request Status page.
Field
Configuration Request Status
Total Count
Success Count
Failure Count
Peer IP Address
D-Link
Oct. 2015

Figure 392: Peer Switch Configuration Request Status

Table 359: Peer Switch Configuration Request Status

Description
Indicates the global status for a configuration push operation to one or
more peer switches. The status can be one of the following:
• Not Started
• Receiving Configuration
• Saving Configuration
• Success
• Failure—Invalid Code Version
• Failure—Invalid Hardware Version
• Failure—Invalid Configuration
Indicates the number of peer switches included at the time a
configuration download request is started, the value is 1 if a download
request is for a single switch.
Indicates the total number of peer switches that have successfully
completed a configuration download.
Indicates the total number of peer switches that have failed to
complete a configuration download.
If one or more peer switches are present, lists the IP address of each
switch in the cluster and indicates the configuration request status of
that switch.
Configuring Advanced Settings
Unified Wired and Wireless Access System
Page 627